Replace Nissan Key Fob Batteries
If your Nissan key fob isn't responding properly to your commands, it's a sign that its battery is dying. Fortunately, this is an easy fix that most people can fix themselves.
To replace the battery, you can buy an alternative one from a hardware store or refer to the owner's manual for the model you own.
Change the Battery
The key fob on your Nissan model is equipped with a built-in lithium battery that will eventually lose its charge. The key fob's battery can be changed in a matter of minutes. First, you'll need to purchase a CR2032 battery. This is a small coin cell battery that is often used in key fobs and it can be found at most convenience stores. You will also need gloves (latex or non-latex) and a small flathead screwdriver to open the fob. Before starting, make sure to check your owner's manual for specific steps and instructions.
Once you have the new battery, take out the old one by turning the fob over and looking at the backside. You will see a small latch that you have to let go by pulling it down. This will release the mechanical key from its original position inside the fob.
Place the battery in place and ensure it is properly positioned. Close the fob when the battery is installed and click the two sides of the fob together. Test your key fob after you have completed this step by pressing the unlocking button. You'll now be able to utilize the many functions of your Nissan when everything is functioning properly. After changing the battery, it's a good idea re-program your key fob to make sure that it's functioning correctly.
Replacing the Transmitter
With your key fob functioning as the "key" to a myriad of your car's most important functions, it can be a big blow when you lose or damage it. If you lose or damaged key fob, you'll be without the ability to lock and start your vehicle.
It's a good idea keep a spare keyfob at reserve in case of emergency. Fortunately, the process for replacing your Nissan key fob is simple. The process of replacing your Nissan key fob can be quite simple. You'll require an entirely new flathead screwdriver and a new battery to take out the old.
You'll require a round Panasonic CR 2032 3V battery (you can typically find them in multipacks at less than $5 USD). The battery is situated in the back half of the key fob. You'll require a small flathead screwdriver to gently separate the two halves. Utilize a flathead screwdriver and a small flathead to take off the clip that is on the top of the battery. Make sure to note the place of placement. Replace the battery and put the key fob back together. You can test it to confirm that it works properly.
As with any electronic device such as your Nissan Intelligent Key will eventually become worn out by regular usage and require to be replaced. To avoid this you should try to protect your key fob from magnetic fields, water and physical impacts Be careful not to drop it or place too much pressure on it.
Replace the Key
If your Nissan key fob is not working and you're unable to use it to unlock or start your car. This is a problem for those who have to go to work in Detroit or to run errands near Dearborn or have a night on the town close to Troy.
It's not difficult to change the battery on your Nissan Smart Key. You can replace the battery at home, or at the dealership. A pack usually costs $5 or less.
Start by flipping the fob upside down and pressing a small catch on the back. This will open the emergency mechanical keys inside. While replacement nissan keys won't be able to use the emergency key to start your vehicle, it will let you open the door.
Then look for a tiny gap on the top of the casing for the key fob. These are great to put the screwdriver in it, allowing you to break the two parts of the key fob apart. Once you've reached the internal battery, take it out it and take note of its location. When you are ready to put back together your key fobs, insert the new battery and snap the two pieces of the case back together. Then you can insert the mechanical key and your Nissan smart key will work as usual.
Other Issues
Many modern cars are equipped with key fobs that let the user to lock and start them without using the physical car key. Key fobs use a transmitter to communicate with the computer system in the car.
There are many possible reasons why your Nissan key fob won't function after replacing the battery. For one, the new battery might not be properly seated in the key fob. A reset of the key fob is also a possibility. Luckily, this is an easy procedure that can be accomplished at home using just a few tools.
For instance, you'll require a screwdriver, preferably with a flat head, to open the key fob, and then remove the old battery. Then, you'll need the screwdriver to break open the back of the key fob and insert the new battery. It is also necessary to reprogramme your key fob in order for it to work with your vehicle.
Fortunately, most Nissan key fobs can be programmed which means that you can do this yourself. This is usually done by inserting the keyfob in the ignition two times in five seconds. If this fails then you should bring your key fob to an auto locksmith or dealer to get it programmed. The cost will depend on the person you speak to and the type of car you own.